jaisbo@yahoo.com   +(91)-11-23634366
Home » Our Products » Laboratory Instruments

Laboratory Instruments

5001 - “JAISBO” HOT AIR OVEN (UNIVERSAL)
CAT.NO. INNER DIMENSIONS (WxDxH) APPROX. CAPACITY Approx. Load Approx. No. of Shelves
5001/1 300 x 300 x 300 mm (12”x12”x12”) 27 ltrs. 0.75 KW 2
5001/2 350 x 350 x 350 mm (14”x14”x14”) 42 ltrs. 0.75 KW 2
5001/3 450 x 450 x 450 mm (18”x18”x18”) 90 ltrs. 1.50 KW 2
5001/4 450 x 450 x 600 mm (18”x18”x24”) 120 ltrs. 1.50 KW 2
5001/5 600 x 600 x 600 mm (24”x24”x24”) 216 ltrs. 2.25 KW 2
5001/6 600 x 450 x 900 mm (24”x18”x36”) 240 ltrs. 2.25 KW 2
A double walled unit with outer body made of Mild Steel Sheet treated for degreasing & rust proofing duly powder coated. Inner chamber made of Stainless Steel Sheet (304 Grade) and adjustable Stainless Steel Wire Mesh shelves. Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat loss. The Double Walled Door has synthetic rubber / fibre gasket. Unit has ventilation slides on two sides to control inner air/vapor circulation. Fitted with beaded heating elements placed in ribs, at bottom and sides for uniform heat distribution. Unit is provided with two lamps and ON/OFF switch. To work on 220/230 volts AC supply. Unit is o o o fitted with capillary thermostat for temperature control from +5oC ambient to 250oC + 2oC at o 100oC. Complete with air circulation fan.


5002 - “JAISBO” HOT AIR OVEN (UNIVERSAL) DIGITAL
CAT.NO. INNER DIMENSIONS (WxDxH) APPROX. CAPACITY Approx. Load Approx. No. of Shelves
5002/1 300 x 300 x 300 mm (12”x12”x12”) 27 ltrs. 0.75 KW 2
5002/2 350 x 350 x 350 mm (14”x14”x14”) 42 ltrs. 0.75 KW 2
5002/3 450 x 450 x 450 mm (18”x18”x18”) 90 ltrs. 1.50 KW 2
5002/4 450 x 450 x 600 mm (18”x18”x24”) 120 ltrs. 1.50 KW 2
5002/5 600 x 600 x 600 mm (24”x24”x24”) 216 ltrs. 2.25 KW 2
5002/6 600 x 450 x 900 mm (24”x18”x36”) 240 ltrs. 2.25 KW 2
Digital Hot Air Oven (Universal) same as above but fitted with Digital Temperature Controller cum Indicator.


5003 - “JAISBO” VACUUM OVEN (DIGITAL)
CAT.NO. INNER DIMENSIONS (WxDxH) APPROX. CAP. (Approx.)
5003/1 250 x 300 mm 14 ltrs.
5003/2 300 x 300 mm 21 ltrs.
Double walled units with outer made of MS Sheet duly epoxy powder coated and inner made up of heavy gauge Sheet (304 Grade) and MS Lid. Space between inner chamber and outer wall is filled o with high grade mineral wool for minimal heat loss. Temperature Range from +5oC ambient to o o 150oC is controlled by Digital Temperature Indicator cum Controller with an accurracy of +1oC. Provided with Silicon Rubber Gasket, Vacuum Gauge. See through transparent window of toughened glass at the door and shelves. To work on 220/230 Volts AC, without Vaccum Pump.


5004 - “JAISBO” (DIGITAL) RECTANGULAR MUFFLE FURNACE (Laboratory Model)
CAT.NO. CHAMBER DIMENSIONS (WxDxH) Approx. LOAD KW
5004/1 100x100x225 mm 1.5
5004/2 125x125x300 mm 3.0
5004/3 150x150x300 mm 3.5
5004/4 200x200x300 mm 5.0
Outer made of double walled thick MS Sheet duly painted. Muffle chamber made of high grade ceramic is surrounded with heating elements made of Kanthal “A-1” wire and backed by high temperature ceramic wool (instead of fire bricks) insulation to avoid thermal loss. Temperature control unit is fitted with thermostat and digital temp. and indicator lamps. The unit is supplied complete with one Pyrometer. Thermocouple, Silver Thermal Fuse, Main Lead with Power Plug. To work on 220/230 volts or o o 400/440 volts AC supply. Maximum temp. is 1000oC and working temp. 900oC. .


5005 - “JAISBO” LABORATORY INCUBATOR (HEAT)
CAT.NO. INNER DIMENSIONS (WxDxH) APPROX. CAPACITY Approx. Load Approx. No. of Shelves
5005/1 300 x 300 x 300 mm (12”x12”x12”) 27 ltrs. 0.50 KW 2
5005/2 350 x 350 x 350 mm (14”x14”x14”) 42 ltrs. 0.50 KW 2
5005/3 450 x 450 x 600 mm (18”x18”x24”) 120 ltrs. 1.00 KW 2
5005/4 600 x 600 x 600 mm (24”x24”x24”) 216 ltrs. 1.50 KW 2
5005/5 600 x 450 x 900 mm (24”x18”x36”) 240 ltrs. 1.50 KW 3
A double walled unit with outer body made of MS sheet treated for degreasing & rust proofing duly powder coated and inner chamber made of Stainless Steel (304 Grade) sheet. Provided with adjustable Stainless Steel Wire Mesh/perforated shelves. Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat loss. The Double Walled Door is fitted with glass window to facilitate viewing inside chamber without disturbing the inner temperature and has synthetic rubber/fiber gasket. Unit has ventilation slides on two sides to control inner air/vapor circulation. Fitted with beaded heating elements placed in ribs, at bottom and sides for uniform heat distribution. Unit is fitted with two lamps and ON/OFF switch. To work on 220/230 volts AC supply. Unit is fitted with o o capillary thermostat for temperature control from +5oC ambient to 70oC . Complete with air circulation fan.


5006 - “JAISBO” LABORATORY INCUBATOR (HEAT) DIGITAL
CAT.NO. INNER DIMENSIONS (WxDxH) APPROX. CAPACITY Approx. Load Approx. No. of Shelves
5006/1 300 x 300 x 300 mm (12”x12”x12”) 27 ltrs. 0.50 KW 2
5006/2 350 x 350 x 350 mm (14”x14”x14”) 42 ltrs. 0.50 KW 2
5006/3 450 x 450 x 600 mm (18”x18”x24”) 120 ltrs. 1.00 KW 2
5006/4 600 x 600 x 600 mm (24”x24”x24”) 216 ltrs. 1.50 KW 2
5006/5 600 x 450 x 900 mm (24”x18”x36”) 240 ltrs. 1.50 KW 3
Laboratory Incubator same as above but fitted with Digital Temperature Controller cum Indicator.


5007 - “JAISBO” ORBITAL SHAKER
CAT NO. TRAY SIZE in mm Digital Speed Indication
5007/1 325 x 325 No
5007/2 425 x 425 No
Body Material is MS painted with Epoxy Powder.
Tray Material is SS.
Shaking speed : 20-200 Orbital strokes per min. (without load)
Permanent Magnet Geared DC motor with 25 mm dia. motion is used
Note : SS Lotus clamps for holding the flasks in the above shakers to be ordered separately (listed below)


5008 - “JAISBO” RECIPROCATING SHAKER
CAT NO. TRAY SIZE in mm
5008/1 325 x 325
5008/2 425 x 425
Body Material is MS painted with Epoxy Powder.
Tray Material is SS.
Shaking speed : 10-200 strokes per min. (without load)
Permanent Magnet Geared DC motor with 35 mm stroke length is used
Note : SS Lotus clamps for holding the flasks in the above shakers to be ordered separately (listed below)
table
Compulsory Accessories
Spring loaded SS lotus clamps (removable) for holding the Flasks in Orbital and Reciprocating Shakers to be ordered separately
CAT. NO. Flask Capacity in ml. No. of SS Lotus Clamp required for tray size
325 x 325 mm 425 x 425 mm
5008/3 50 16 25
5008/4 100 16 25
5008/5 250 8 16
5008/6 500 8 16
5008/7 1000 4 8
5008/8 2000 3 6

Optional Accessories for Orbital/Reciprocating Shaker
CAT. NO. DESCRIPTION
08/9 Digital speed indicator


5009 - “JAISBO” MICROPLATE SHAKER
CAT NO. Description
5009/1 180 x 150 mm. With springs 2 multi
well plates can be placed on the tray
Body Material is MS painted with Epoxy Powder. Tray size 180x150mm.
Shaking speed : 100-1500 strokes per min.
Permanent Magnet Geared DC motor with 1 mm dia. Orbital motion is used


5010 - MULTIWELL PLATE SHAKER (DIGITAL)
CAT NO. Description
5010/1 Multiwell Plate Shaker
Speed range 100-1100 rpm
Timer - 99 Hrs. 59 Mins.
Accommodates 2 or 4 microplate


5011 - SHAKER (DIGITAL) CAT.
CAT NO. Description SPEED TIMER
5011/1 Orbital Shaker 01
Tray Size (22x22cm)
100-800 rpm 99Hrs. 59 mins.
5011/2 Orbital Shaker 02
Tray Size (33x33cm)
20-500 rpm 99Hrs. 59 mins.
5011/3 Reciprocating Shaker 03
Tray Size (33x33cm)
20-500 rpm 99Hrs. 59 mins.
Note : Digital Shaker comes along with dish attachment. All other spares are to be ordered separately.
Optional Accessories
CAT NO. Description
5011/4 Universal Attachment 01
5011/5 Universal Attachment 02
5011/6 Flask Holder Attachment 01
5011/7 Flask Holder Attachment 02
5011/8 Dish Attachment 01
5011/9 Dish Attachment 02
11/10 Lotus Clamp for fixing Concial Flask 50-100 ml
11/11 Lotus Clamp for fixing Concial Flask 250 ml
11/12 Lotus Clamp for fixing Concial Flask 500 ml


5012 - “JAISBO” INCUBATOR - SHAKERS
CAT NO. TRAY SIZE IN mm Chamber Size in mm Stroke Length Stroke Speed per min.
5012/1 180 x 150 2 plates of 96 wells can be placed. 280 x 280 x 75 1 mm dia. orbit 100 to 1500

Incubator with Orbital Shaker Mechanism
CAT NO. TRAY SIZE in mm Chamber Size in mm Speed Indication Stroke Length Stroke Speed per min. (without load)
5012/2 325 x 325 400 x 400 x 300 ht. No 25 mm dia. 20 to 200
5012/3 325 x 325 400 x 400 x 300 ht Yes 25 mm dia. 20 to 200
5012/4 425 x 425 500 x 500 x 300 ht No 25 mm dia. 20 to 200
5012/5 425 x 425 500 x 500 x 300 ht Yes 25 mm dia. 20 to 200
Note : SS Lotus clamps for holding the flasks in the above shakers to be ordered separately (Refer Cat.No.5008/3)
Temp. Range (Ambient +5) to 60oC
Digital display with microprocessor based PID Controller with PT 100 sensor having resolution + 1.0oC o and accuracy + 1oC. Fitted with air-circulation fan to maintain temperature uniformity.
Transparent acrylic cover allows unobstructed view of the chamber contents from front, from two sides and from top. The body material is MS powder coated; inner walls of the incubator will be pasted with laiminated sheets to avoid heat loss. Tray material is SS. Drive mechanism is powered by Permanent Magnet Geared DC motor.


Jaisbo Laboratory Glassware Suppliers | Jaisbo Laboratory Consumables Exporters | Jaisbo Laboratory Plastic Ware Manufacturers | Jaisbo Laboratory Instruments Suppliers | Jaisbo Laboratory Equipment Suppliers | Jaisbo Quartzware Exporters