jaisbo@yahoo.com   +(91)-11-23634366
Home » Our Products » Laboratory Instruments

Laboratory Instruments

5013 - “JAISBO” B.O.D. INCUBATOR (Low Temperature Incubator)
CAT.NO. INNER CHAMBER SIZE AT BASE APPROX. NO. OF SHELVES
5013/1 455x410x610 mm 2
5013/2 505x415x830 mm 2
5013/3 570x550x875 mm 3
5013/4 650x580x900 mm 3
5013/5 700x650x900 mm 4
5001/6 600 x 450 x 900 mm (24”x18”x36”) 240 ltrs.
Unit with double walled construction with inner chamber of SS Sheet (304 grade) and outer body made of MS Sheet duly epoxy powder coated. The gap between the outer and the inner wall is filled with PUF insulation for minimal thermal losses. Two air circulation fans are fitted at the back of the Inner Chamber for maintaining temperature uniformity. Inner transparent door facilitate viewing inside the chamber without disturbing the temperature. The double walled door is provided with magnetic synthetic gasket and lock & key arrangement. Hermetically sealed compressor is mounted on Heavy MS angle frame at the bottom of the unit. The Control Panel is provided with separate indicators for Mains, Heating and Cooling. The complete unit is mounted on Castor wheels and supplied with SS wire mesh shelves, cord and plug to work on 220/230 AC supply.

Temperature range from 10oC to 50oC with an accuracy of + 1oC at 50oC is controlled by Digital Temperature Indicator cum Controller (with display for SV and PV).

Optional : Automatic Voltage Stabilizer (Highly Recommended) at an extra cost of

Optional : UV Lights at an extra cost of


5014 - “JAISBO” ORBITAL SHAKER cum BOD INCUBATOR
CAT.NO. INNER CHAMBER SIZE AT BASE APPROX. SHAKING PLATFORM SIZE APPROX. SPEED RANGE
5014/1 550 x 550 mm 450 x 450 mm 50-250 RPM
Outer body is made of MS Sheet duly powder coated. Inner chamber made of thick Stainless Steel Sheet (304 grade). The gap between the outer and the inner wall is filled with insulation for minimal thermal losses. Unit has double walled door with a transparent see through window. Variable speed orbital shaking platform is fitted with DC driven motor for continues operation. Shaking platform is provided at the bottom of chamber so as to shake conical flasks. The shaking platform can accommodate 16 flasks of 250 / 500 ml or 25 flasks of 100 ml or 36 flasks of 50 ml (one set of clamps with shaking platform is supplied with the unit). Hermetically sealed compressor is provided at the bottom of the unit, mounted on MS angle frame. The unit is fitted with Digital Temperature Indicator-cumcontroller to control the temperature from 10oC to 50oC + 1oC and Digital Timer. Supplied complete with 2 wire mesh shelves made of SS for use of the unit as a standard BOD incubator. The unit is fitted with air circulation fan for temperature uniformity. To work on 220/230 Volts AC supply.

Optional : Automatic Voltage Stabilizer (Highly Recommended) at an extra cost of

Optional : UV Lights at an extra cost of


5014 - “JAISBO” BOD Incubator Shaker
CAT.NO. INNER CHAMBER SIZE AT BASE APPROX. SHAKING PLATFORM SIZE APPROX. SPEED RANGE
5014-IS-3 650 x 650 mm 600 x 600 mm 50-250 RPM
  • Full view inner glass door permits inspection of specimens, without disturbing the same.
  • Lock and key arrangement is provided
  • Unit is fitted with door operated illumination lamp inside the chamber.
  • Refrigeration unit is formed by hermetically sealed compressor and the cooling coil are distributed all round the chamber and lie in the air circulation path.
  • The inner chamber is properly insulated with special PUF to prevent thermal losses.
  • Air Circulating fan for Uniform Temperature.
  • Fitted with variable speed and Digital temperature Controller
  • Temp range 5 to 60°C
  • Specially designed to hold :
    • 12 flasks of 250 ml or mix
      (Size of platform 600 x 600 mm)


5015 - “JAISBO” SEED GERMINATOR (Single Chamber)
CAT.NO. CHAMBER DIMENSIONS CAPACITY
(WxDxH) Approx. Approx.
5015/1 505x415x830 mm 171 ltrs. (6.1 cuft.)
5015/2 570x550x875 mm 274 ltrs. (10 cuft.)
5015/3 650x555x910 mm 305 ltrs. (12 cuft.)
Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber to perform different experiments without going into the field. The double walled unit has inner chamber and trays made up of SS sheet (304 grades) and outer chamber of MS Sheet duly epoxy powder coated. The gap between the outer and inner wall is filled with PUF insulation to prevent thermal losses. Air circulation fan is fitted at the back of the Inner Chamber for maintaining temperature uniformity. The Double Walled Door is fitted with transparent see through window to facilitate viewing inside chamber without disturbing the inner temperature. The door also has magnetic synthetic rubber gasket and lock & key arrangement. Door operated illumination lamp is fitted inside the chamber for easy visibility. Hermetically sealed compressor is mounted on Heavy MS angle frame at the bottom of the unit. o o o o Temperature from 10oC to 50oC, + 2oC at 50oC is controlled by Microprocessor Based (PID) Digital Temperature Indicator cum Controller. Humidity (not adjustable) is created in a SS water reservoir fitted at the bottom to provide 90% to 95% + 3% RH Humidity. Supplied complete with adjustable SS Wire Mesh shelves and cord & plug to work on 220/230 VAC supply.

Optional : Automatic Voltage Stabilizer (Highly Recommended) at an extra cost of


5016 - “JAISBO” HUMIDITY AND TEMPERATURE (CONTROL CABINET)
CAT.NO. CHAMBER DIMENSIONS (WxDxH) Approx. CAPACITY Approx. NO. OF SHELVE
5016/1 505x418x830 mm 171 ltrs. (8.1 cuft.) 2
5016/2 570x555x875 mm 276 ltrs. (10 cuft.) 3
5016/3 650x580x900 mm 336 ltrs. (12 cuft.) 3
Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity. Inner chamber and trays made of SS sheet and outer body of MS sheet duly epoxy powder coated. The gap between the outer and inner wall is filled with high grade mineral wool insulation to prevent thermal losses. Double walled door is provided with a transparent see through window, magnetic synthetic rubber gasket and lock & key arrangement. Air Circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber. Temperature range from o o o o + 10oC ambient to 50oC, + 2oC at 50oC is controlled by Microprocessor based PID Digital Temperature Indicator cum Controller. Humidity is created through steam injection arrangement and is controlled through an Digital Humidity Controller, thus controlling the desired set humidity range from atmospheric humidity to 95% + 3% RH. Mounted on castor wheels. To work on 220/230 Volts AC supply.

Optional : Automatic Voltage Stabilizer (Highly Recommended) at an extra cost of


5017 - “JAISBO” ENVIRONMENTAL CHAMBER (COOLED HUMIDITY CHAMBER)
CAT.NO. CHAMBER DIMENSIONS (WxDxH) Approx. CAPACITY Approx. NO. OF SHELVE
5017/1 505x418x830 mm 171 ltrs. (6.1 cuft.) 2
5017/2 570x555x875 mm 276 ltrs. (10 cuft.) 3
5017/3 650x580x900 mm 336 ltrs. (12 cuft.) 3
Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity. Inner chamber and trays made of SS sheet and outer body of MS sheet duly epoxy powder coated. The gap between the outer and inner wall is filled with high grade PDF insulation to prevent thermal losses. Double walled door is provided with a transparent see through window, magnetic synthetic rubber gasket and lock & key arrangement. A air circulation fan is fitted to maintain uniform o o temperature and humidity conditions throughout the chamber. Temperature range from 5oC to 60oC is controlled by Microprocessor based PID Digital Temperature Indicator cum Controller with an accuracy o of +1oC. Humidity is created through steam injection arrangement and is controlled through an Digital Humidity Controller, thus controlling the desired set humidity range from atmospheric humidity to 95% +3% RH. Mounted on castor wheels. To work on 220/230 Volts AC supply. Unit is fitted with hermetically sealed compressor mounted on heavy MS angle frame at the bottom, to control temperature range below ambient.

Optional : Automatic Voltage Stabilizer (Highly Recommended) at an extra cost of


5018 - “JAISBO” PLANT GROWTH CHAMBER
CAT.NO. INNER DIMENSIONS (WxDxH) APPROX. CAPACITY APPROX.
5018/1 505.5 x 830 mm 6.1 cuft. (171 ltrs.)
5018/2 570 x 550 x 875 mm 10 cuft. (274 ltrs.)
5018/3 650 x 550 x 900 mm 12 cuft. (320 ltrs.)
5018/4 700 x 650 x 900 mm 15 cuft. (408 ltrs.)
5018/5 775 x 775 x 900 mm 20 cuft. (540 ltrs.)
5018/6 825 x 825 x 1200 mm 30 cuft. (815 ltrs.)
It has outer wall made of MS Sheet duly epoxy powder coated and inner wall made up of heavy gauge SS Sheet. The gap between the outer wall and chamber is filled with PDF insulation to avoid thermal loss. Besides outer double walled door, a full view inner plexi glass door allows inspection of test samples without disturbing the inner chamber conditions. Unit is supplied with 3 adjustable o o o perforated shelves. Temperature Range from 5oC to 50oC + 1oC is controlled by Dual Setting Microprocessor based PID Digital Temperature Indicator-cum-Controller so as to set two different temperatures for Day and Night. Exterior illumination with fluorescents tubes fitted on both sides of the chamber accounts for artificial day light, and the cyclic illumination conditions are regulated by o o o Automatic 0-24 Hr. timer. When all the tubes are ON temperature from 15o C to 50o C + 1oC can be obtained. Fitted with Solid State Digital Humidity Indicator cum Controller to control humidity from 55% to 95% at cool temperatures. Light intensity can be adjusted according to requirement. Arrangements for increasing the humidity are provided and not for decreasing. Unit is fitted with Hermetically Sealed Compressor.

Optional : Automatic Voltage Stabilizer (Highly Recommended) at an extra cost of


5019 - “JAISBO” WATER BATH RECTANGULAR (Double Wall)
CAT NO. INNER DIMENSIONS (WxDxH) APPROX. CAPACITY Approx. HEATING LOAD NO. OF HOLES
5019/1 300 x 250 x 100 mm
(6 holes of 75 mm dia)
8 ltrs. 1.0 KW 6
5019/2 405 x 355 x 100 mm
(12 holes of 75 mm dia)
15 ltrs. 2.0 KW 12
A double walled bath with inner chamber made of SS sheet (304 grades) and outer / made of MS sheet duly epoxy powder coated. Provided with SS lid having 75 mm holes with removable concentric rings. The gap between outer and inner walls is fit with special grade glass wool insulation. Unit is fitted with o o capillary thermostat for temperature control from +5oC ambient to 90oC.


5020 - “JAISBO” WATER BATH RECTANGULAR (Double Wall) DIGITAL
CAT NO. INNER DIMENSIONS (WxDxH) APPROX. CAPACITY Approx. HEATING LOAD NO. OF HOLES
5020/1 300 x 250 x 100 mm
(6 holes of 75 mm dia)
8 ltrs. 1.0 KW 6
5020/2 405 x 355 x 100 mm
(12 holes of 75 mm dia)
15 ltrs. 2.0 KW 12
Digital Water Bath Rectangular (double wall) same as above but fitted with Digital Temperature Indicator cum Controller.
table


5021 - “JAISBO” SEROLOGICAL WATER BATH
CAT NO. INNER DIMENSIONS (WxDxH) APPROX.
5021/1 300 x 250 x 175 mm
5021/2 400 x 300 x 175 mm
5021/3 450 x 300 x 175 mm
5021/4 600 x 300 x 175 mm
These units are double walled with inner chamber made of SS sheet (304 grade) a outer made of MS sheet duly epoxy powder coated. The gap between the walls is filled with special grade glass wool to avoid thermal losses. A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element, covered with perforated removable diff user tray. A SS sheet cover is provided with the unit. Supplied complete with cord and plug to work on 220/230 volts AC supply but without o o racks. Unit is fitted with capillary thermostat for temperature control from +5oC ambient to 90oC.


5022 - “JAISBO” DIGITAL SEROLOGICAL WATER BATH
CAT NO. INNER DIMENSIONS (WxDxH) APPROX.
5022/1 300 x 250 x 175 mm
5022/2 400 x 300 x 175 mm
5022/3 450 x 300 x 175 mm
5022/4 600 x 300 x 175 mm
Digital Serological Water Bath same as above but fitted with Digital Temperature Indicator cum Controller.


5023 - “JAISBO” WATER BATH WITH CIRCULATOR
CAT NO. TEMP. RANGE oC WORKING SPACE (INCLUDING CIRCULATOR) mm NO. OF RACK
5023/1 Amb. to 95oC 300 x 175 x 160 SS Gabled 2
5023/2 Amb. to 95oC 350 x 300 x 160 SS Flat Not provided
Body Material - MS Painted with Powder coating l Bath inner material - SS 304 l Digital display with o microprocessor based PID Controller to + 1 C accuracy by using PT 100 sensor l Temperature Range o ambient to 95 C Fitted with Circulator for uniformity of temperature inside the Bath.

Note : For supplying the racks, test tube dimensions have to be mentioned.
STANDARD SIZE OF TEST TUBE FOR WATER BATH CIRCULATOR IS GIVEN BELOW
RACK 1 RACK 2
0.5 ml 1.5 ml 13 mm 16 mm 19 mm
15 Holes 10 Holes 8 Holes 3 Holes 3 Holes

CAT NO. DESCRITPION
5023/3 Water Bath (300mmx175mmx160mm) same as above but with Stainless Steel outer Body.
5023/4 Water Bath (350mmx300mmx160mm) same as above but with Stainless Steel outer Body.


6023/1 - “JAISBO” High Precision Water Bath
MOC Stainless Steel , Double Walled - duly Insulated with see through glass window
Window Option with See Through Window
Heating Load 1.5 KW (1.0 KW + 0.5 KW)
Temperature Range 0 C to 100 C
Temperature controller Microprocessor Based PID Digital Temperature Indicator-cum-Controller
Temperature Sensitivity ±0.2 C
Temperature Sensor RTD (Pt-100)
Timer In-Built N.A.
Temperature Display LED Display for Set Value (SV) & Process Value (PV)
Stirring Device Available with stirring arrangement with the help of FHP stirrer, as standard accessory.
Diffuser Shelf Heater protective perforated cover made of stainless Steel
Regulator Solid state electronic relay with protective heat sink.


6023/2 - “JAISBO” Refrigerated Circulating Bath
Model No. JSB 62-CB
Material Stainless Steel
Automation Type Automatic
Color Grey
Usage/Application Laboratory
Capacity 6 ltr.
Refrigerated Circulating Bath
Refrigerated Circulating Bath is widely used in Petroleum, Chemical, Electronic Instrumentation, Physics, Chemistry,Bioengineering, Medical and health, Life sciences, Light industry food property testing and chemical analysis, researchdepartments, universities, enterprise quality inspection and production departments.

Salient Features
  • Overheat protection and liquid level alarm function
  • Waterlevel alarm function
  • Fast cooling, low noise,low vibration, stable and reliable performance
  • Pump flow rate 6L/min. & Programmable temperature controller
  • It can be attached temperature maintenance in
    • Fermentation tank
    • Spectrophotometer
    • Rotary Evaporator
    • Polarimeter
    • Refractometer
    • Chromatographic Column
  • PT100 temperature sensor.
  • Both sides folding handle for easy movement

5024 - “JAISBO” WATER BATH WITH SHAKERS
CAT NO. TYPE TANK SIZE in mm TRAY SIZE in mm STROKE SPEED PER min.
5024/1 Reciprocating (Horizontal) 350 x 300 x 160 ht. 250 x 250 x 110 ht. 10 - 200
5024/2 Reciprocating (Horizontal) 450 x 350 x 160 ht. 350 x 300 x 110 ht. 10 - 200
5024/3 Orbital 400 x 375 x 250 ht. 325 x 325 20 - 200

CAT NO. DESCRITPION
5024/4 Reciprocating Shaking Water Bath (350mmx300mmx160mm) same as above but with Stainless Steel Outer Body
5024/5 Reciprocating Shaking Water Bath (450mmx350mmx160mm) same as above but with Stainless Steel Outer Body
5024/6 Orbital Shaking Water Bath (400mm x 375 mm x 250 mm) same as above but with Stainless Steel Outer Body
Optional Accessories
Spring loaded SS lotus clamps (removable) for holding the Flasks in the Water Shakers to be ordered separately.
CAT NO. FLASK CAPACITY in mm NO. OF SS LOTUS
250 x 250 mm 325 x 325 mm
5024/7 50 9 16 20
5024/8 100 9 16 20
5024/9 250 5 8 9
5024/10 500 4 8 6
5024/11 1000 - 4 -
Body Material - MS Painted with Powder coating
l Tray material - Stainless Steel, SS cover is provided l Temp. Range (Ambient + 5) to 95oC o l Digital Display with microprocessor based PID Controller of Accuracy + 1oC by using PT 100 as sensor l Shaking speed 20 - 200 / 10-100 stroke per min. (without load) l Supplied with SS Gabled cover.


Jaisbo Laboratory Glassware Suppliers | Jaisbo Laboratory Consumables Exporters | Jaisbo Laboratory Plastic Ware Manufacturers | Jaisbo Laboratory Instruments Suppliers | Jaisbo Laboratory Equipment Suppliers | Jaisbo Quartzware Exporters