jaisbo@yahoo.com   +(91)-11-23634366
Home » Our Products » Laboratory Instruments

Laboratory Instruments

5025 - “JAISBO” OIL BATH
CAT.NO. CAPACITY LITRES DIMENSIONS DIA x DEPTH (mm)
5025/1 1 165 x 90
5025/2 2 205 x 115
5025/3 3 225 x 130
5025/4 5 270 x 155
5025/5 10 335 x 190
5025/6 20 400 x 220
Body Material - SS 316, Single walled without insulation l Heater material used in Bath - SS 316, o Bakelite Handles are provided to bath l Temperature range Ambient +5 to 200oC by separate o temperature control unit with + 1.0oC accuracy controlled by microprocessor based PID Controller using a PT-100 sensor. A unit can be kept 2 mtrs. away from the oil bath. Oil bath can be used for heating round bottom glass flasks.


5026 - “JAISBO” HEATING BLOCK
CAT.NO. CAPACITY
5026/1 Heating Block with 3 nos. interchangeable aluminium blocks of 75 x 50 x 50 mm size for accommodating 0.5 ml., 1.5 ml Eppendorf & 12mm test tubes.
5026/2 Heating Block with 3 nos. interchangeable aluminium blocks of 75 x 50 x 50 mm size for accommodating 0.5 ml., 1.5 ml Eppendorf & 16mm test tubes.
5026/3 Heating Block with 3 nos. interchangeable aluminium blocks of 75 x 50 x 50 mm size for accommodating 0.5 ml., 1.5 ml Eppendorf & 19mm test tubes.
5026/4 Single Heating Block with 150 x 75 x 50 mm size accommodating 50 tubes of 10 mm Dia. for LAL test
5026/5 Single Heating Block with 150 x 100 x 50 mm size accommodating 60 tubes of 10 mm Dia. for LAL test
Temperature range ambient to 100 C controlled to + 1.0oC by Digital display with microprocessor based PID Controller display using PT 100 as sensor. The body made of heavy M.S. painted with Epoxy Powder Paint. The front panel is provided with an Arcylic door with lock and key.
Note : Blocks for using with any other test tubes can be supplied as per specific requirements at extra cost. Please mention the dimensions of the tubes while placing the order.


5027 - “JAISBO” LABORATORY STIRRER
CAT.NO. MOTOR CAPACITY (HP)
5027/1 Lab Stirrer same as above with Digital RPM Display
The motor stirrer having maximum speed up to 4000 RPM. Unit is clamped to a chrome plated rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed Motor with speed regulator is fitted with SS Stirrer rod to give smooth and noiseless operation.


6027/1 - “JAISBO” TISSUE HOMOGENIZER
Speed Range 8K to 35K rpm (1K rpm Increment)
Rotor Line Speed 6.3m/sec ~ 14m/sec
Working Noise 72dB
Dimension ( LxWxH) 55x46x230mm


5028 - “JAISBO” LAMINAR FLOW CABINET
HORIZONTAL LAMINAR FLOW CABINET
CAT.NO. WORKING SIZE (WxDxH) Approx. WOODEN MILD STEEL STAINLESS STEEL
5028/1 2’x2’x2’ 62000.00 68000.00 77500.00
5028/2 3’x2x2’ 70000.00 79000.00 88500.00
5028/3 4’x2’x2’ 81950.00 90000.00 99950.00
5028/4 6’x2’x2’ 13000.00 135000.00 158500.00

VERTICAL LAMINAR FLOW CABINET
CAT.NO. WORKING SIZE STAINLESS STEEL (WxDxH) Approx. WOODEN MILD STEEL STAINLESS STEEL
5028/6 2’x2’x2’ 68000.00 77000.00 89500.00
5028/7 3’x2’x2’ 80000.00 85000.00 99500.00
5028/8 4’x2’x2’ 90000.00 98000.00 112000.00
5028/9 6’x2’x2’ 140000.00 139000.00 160000.00
Structure made of thick ply board covered with sun mica. Sides of work bench covered with transparent acrylic sheet. Front acrylic door of collapsible type. Work-bench made of thick ply-board covered with stainless steel sheet. HEPA Filter provided vertically on back of the work bench horizontally. Blowers, motor and pre-filters fitted in lower portion of the cabinet. Properly balanced blowers fitted on 1/4 H.P. Electric motor provided to supply sufficient air to HEPA filter. Pre-filters provided to supply pre filtered air to the blowers. One fluorescent tube and one U.V. Germicidal tube provided overwork bench. Static pressure manometer fitted to the unit.


5029 - “JAISBO” FUME HOOD
CAT.NO. WORKING SIZE (WxDxH) APPROX. ILLUMINATION
5029/1 2’x2’x2’ 1x20W
5029/2 3’x2’x2’ 1x20W
5029/3 4’x2’x2’ 2x40W
5029/4 5’x3’x3’ 2x40W
5029/5 6’x3’x3’ 2x40W
Fabricated out of thick wooden board. These are designed to throw-out all toxic/harmful vapors, thus protecting costly instruments and the person working in the lab. Outer is finished with sun mica and inner epoxy painted. Working table top is made of stainless steel and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts AC Supply.


5030 - “JAISBO” BIOLOGICAL SAFETY CABINET (WITH VIRUS BURN OUT UNIT)
CAT.NO. WORKING SIZE (WxDxH) APPROX. SIZE OF HEPA FILTER NO. OF HEPA FILTERS ILLUMINATION
5030/1 2’x2’x2’ 2’x2’x6” 1 1x20 W
5030/2 3’x2’x2’ 3’x2’x6” 1 1x20 W
5030/3 4’x2’x2’ 4’x2’x6” 1 2x40 W
5030/4 6’x2’x2’ 6’x2’x6” 2 2x40 W
The cabinets made of thick ply board covered with sun mica. Interior surfaces are epoxy painted for its longer life. The work table is made of heavy gauge SS sheet and is fitted with UV Germicidal Light. Static Pressure Manometer. Exhaust System suitable for 6 feet duct and Virus Burn Out Unit. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-filter and HEPA Filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Deficiency Particular Air) filters having efficiency retaining all air borne particles of size 0.3 micron and larger. The blower and motor assembly has statically and dynamically balanced Motor of FHP capacity. The working area is illuminated by fluorescent lights fitted to the unit. The height of the working table provides a comfortable “SIT DOWN” working position for the operator. In addition to the above features of a standard Vertical Laminar Flow Bench, the Bio-safe cabinets have arrangements for recirculating a part of the air thus creating highest level of clean air. Theunit is also convertible to the conventional Vertical Flow Bench with downward air flow by lifting the sliding front door upwards. Air is sucked through the pre-filter and the excess air is thrown out from the top, through a HEPA filter of size 1’x1’x6”. Supplied with HEPA filter, pre-filter, UV light and fluorescent light.


5031 - “JAISBO” LABORATORY AUTOCLAVE VERTICAL
CAT NO. Boiler (DepthxDia) mm
5031/1 450 x 250
5031/2 500 x 300
5031/3 550 x 350
5031/4 600 x 450
5031/5 750 x 550
Electrically operated, double walled. Boiler made of stainless steel, outer Mild Steel, S.S. Lid, having radial locking system. Working pressure 5 p.s.i. to 15 p.s.i. safety valve; Complete with water level indicator, control box fitted with automatic pressure control switch, pressure gauge, steam release valve; pilot lamp, on/off switch for operation on 220 volts A/C main. Complete with Stainless Steel Basket.

Optional Accessories :
  • Timer from 0-60 minutes at an extra cost of
  • Digital temp. Indicator at an extra cost of


5032 - “JAISBO” LABORATORY AUTOCLAVE VERTICAL (FULLY AUTOMATIC)
CAT NO. Boiler (DepthxDia) mm
5032/1 450 x 250
5032/2 500 x 300
5032/3 550 x 350
5032/4 600 x 450
5032/5 750 x 550
Double Body Construction
  • Lid Made Of Thick Stain less Steel
  • Pressure Upto 22 Psi Factory Set At 15 Psi (Temp 121°C )
  • Complete Unit With Automatic Air Purging
  • Digital Temp. Controller & indication
  • Autoclaving Time Cycle Automatically Starts When Set Pressure Is Achieved.
  • Automatic Steam Release Once Autoclaving Cycle Complete.
  • Complete With Pressure Gauge, Safety Valve Steam Release Valve etc.
  • Low Water Level Cut -Off . Low Water level Cut-off Assembly Connected To Heater which Automatically Cut -off Power to Heater If Water Level Is Not Sufficient. Thus Eliminating Heater Burn Out.
  • Foot Lifting Arrangement For Lid.


5033 - “JAISBO” PORTABLE AUTOCLAVE (COOKER TYPE)
CAT NO. INNER DIMENSIONS (WxDxH) APPROX.
5033/1 300 x 300
The body is constructed of SS 304. Suitable of general laboratory use as well as for field sterilization of instrument sand dressings etc. Dome shaped SS lid is provided which seals the autoclave with neoprene 2 joint less gasket. The working pressure is 1.1 to 1.2 Kg/cm (15-18PSI). The sterilizer is made of SS Sheet deepe drawn to cylindrical shape. The seamless construction allows no bacteria residue from dirt accumulation. It is equipped with Pressure Gauge. Spring Loaded Safety Valve, Dead Weight type Safety Valve and Steam Release Valve. The load is held in dressing drums (optional), which is supported on a stand (tripod) the autoclave is hydraulically tested at twice the working pressure. It is fitted with ISI marked heater. Supplied complete with plug cord. Suitable to work on 220/230 Volt, single phase, 50 Hz, AC supply.

Optional Accessories / Spares :
  • Dressing Drum


5034 - “JAISBO” AUTOCLAVE HORIZONTAL (TRIPLE WALLED) (CYLINDRICAL)
CAT NO. Dimensions
5034/1 400 x 600 mm (16 x 24)
5034/2 400 x 1100 mm (16 x 44)
5034/3 500 x 900 mm (20 x 36)
5034/4 500 x 1200 mm (20 x 48)
Optional Accessories
5034/5 Automatic controller for low water level cutout & pressure control Indfoss Piezostat
Construction : Triple walled construction inner chamber is made of high grade stainless steel of SS-304 grade. The outer body is also made of thick stainless steel sheet. The boiler is made of S.Steel. The lid is made of thick steel sheet plate. The unit is duly fitted with highly efficient M.S. Painted Ring & radial locking system duly chrome plated. A three way valve or a multi port Valve made of stainless steel is installed for controlling the sterilization cycle. The pressure is adjustable from 5 psi to 20 psi; pressure is controlled by automatic pressure control switch. Fitted with water level indicator and vacuum breaker. The unit is fitted with temperature gauge, vacuum breaker and steam trap. The whole unit is mounted on a robust tubular stand made of MS duly painted with attractive stove enamel.


5035 - “JAISBO” WATER DISTILLATION UNIT (Single & Double)
CAT NO. PARTICULARS TYPE OUTPUT (Approx.)
5035/1 Vertical Water Distillation Unit Single 1.2 ltr/hr.
5035/2 Vertical Water Distillation Unit Double 1.2 ltr/hr.
5035/3 Horizontal Water Distillation Unit Single 1.5 ltr/hr.
5035/4 Horizontal Water Distillation Unit Double 3.2 ltr/hr.
These units consist of main boiler. A built in heater enclosed in Quartz glass tube. Housing auto water level adjuster, Bottom outlet for cleaning waste discharge which is fitted with Teflon screw cap valve. A coil condenser fitted on top for condensing vapours. The whole unit is mounted on epoxy coated metal box stand and covered with acrylic sheet for protection. Require 1 K.W. power per heater.
These distillation units are more compact, require less space, reliable, easy to operate on continue basis.
Automatic start, cut-off & re-start in synchrony with water pressure.


6035 - “JAISBO” WATER DISTILLATION UNIT
All Quartz Double Distillation Unit
Unit has been designed keeping in view customer requirements and easy serviceability of the equipment.

Unit consists of :
  • Lower boiler with inbuilt heater enclosed in a quartz boiler with a cup on top.
  • Demountable upper boiler with built in quartz coil and condensing unit mounted on the boiler with the help of ball and socket joint
  • Double walled condenser ensures separate condensation of vapours coming from the two boilers using a single cooling circuit
  • Unit mounted on a specially designed metal stand and is also provided with automatic safety Control Unit

Double Distillate Quality :

Parameters Values
Specific Conductivity 0.1 us/cm
Biological Activity (distillate quality) Pyrogen Free
Organic Matter NIL
Total Solids 0.1 mg/ltr

* We recommend a Quartz Reservoir For storage of High purity water.
* All Parameters are under standard test conditions
CAT NO. Des. Distillate Temp. (Output)
6035/1 Water Distillation (Quartz) without safety cut off 65.75 C
6035/2 Water Distillation (Quartz) with safety cut off 65.76 C




5036 - “JAISBO” WATER STILL (WALL MOUNTING)
CAT NO. CAPACITY APPROX. LOAD APPROX.
5036/1 2 ltrs/hr 2.0 KW
5036/2 4 ltrs/hr 3.0 KW
The unit is recommended for making pyrogen free distilled water of a very high degree of purity. Boiler made of stainless steel (SS-304 grade). Special kettle element is fitted with ejection device/Auto cut for safety of the element is case water supply is stopped. The cock fitted to the unit is of brass (chrome plated). A wall-mounting clamp is provided with the unit but without rubber tubing. Supplied with cord & plug to work on 220/230 volts AC supply.


Jaisbo Laboratory Glassware Suppliers | Jaisbo Laboratory Consumables Exporters | Jaisbo Laboratory Plastic Ware Manufacturers | Jaisbo Laboratory Instruments Suppliers | Jaisbo Laboratory Equipment Suppliers | Jaisbo Quartzware Exporters